|
Antolit HSD
Description
Non-oil additive for shutter forms easy dismantling
Fields of application
1- Easy dismantling of shutter forms with smooth surface
2- Protection & long productivity lifetime of shutters
Dosage
0.02- 0.08 kg/m depending on the surface nature and degree of absorption
|
 |
|
|
Bauplast BV
Description
Chloride-free plasticizer of particularly high efficiency, suitable for all quality concrete though it has been specially developed for pumped concrete. Safe easy concrete pouring
Fields of application
1- Concrete pumping
2- Preventing the formation of cracks due to shrinkage.
3- Increase workability and/or hardness without any retardation in setting time.
Dosage
0.3- 0.5% of cement weight |
|
Bauplast B85
Description
Water reducing & retarding plasticizer for concrete
Fields of application
1- Control retardation of setting times to prevent cracks
2- Improve workability
3- Increase strength.
4- Under water concrete pouring
Dosage
0.10- 0.25 Litre per 50 kg cement depending on retardation required & temperature.
|
|
Cemcure
Water base curing compound and surface hardner
Description
Water based solution, when applied to concrete surface it produces water retention. In addition to curing concrete, Cemcure hardens the surface by reacting with the cement binder and the free lime in the concrete to produce a durable and dust proof surface
Fields of application
1- Reinforcement of concrete surfaces & protection from dust
2- Curing of wide concrete surface
3- Curing of prefabricated concrete units
4- Protection against sun radiation during concrete pouring
5- Advisable to use with retarded concrete , large concrete surfaces poured under direct sun shining
Dosage
One litre should be sufficient for approx. 4 to 6 m² |
|
Cempoxy 50
Description
Two-component solvent free epoxy resin based which can be applied to concrete, steel, wood surfaces. etc
It provides high protection surfaces against corrosion, weather, wearing and low concentration chemicals and void filler.
Fields of application
1- Steel tank protection.
2- All concrete surfaces to meet all protection requirements.
3- Flooring, pipes and tubes.
Dosage
One kilogram will cover 2 to 3 m with thickness of 200 microns, depending on surfaces textures and absorbing. |
|
Cemtex Elastic Injector
Description
Two components product, mixed once together. They are ready to react with water and swell to grout joints or repair leaking. Reaction can be controlled by the percentage of accelerator.
Fields of application
1- Stop leakage in any concrete section.
2- Immediate stop leakage from expansion joints.
3- Injection of joints and cracks resultant shrinking problem.
4- Modern Water Stop systems such as the Injecto system.
Dosage
According to the application and the concrete defects. |
|
Cemtex Epoxy Injection
| Description
Low-viscosity material for cracks. It is simple and easy to use and characterized with high hardness efficiency.
Fields of application
1- Injection and filling of cracks.
2- Concrete structure repair.
3- Clay, concrete, GRP pipes repair.
Dosage
Depending on the case.
|
Cemtex Epoxy Grout
Description
Two-components epoxy resin which is formulated to provide a material for repairing concrete and similar material, subjected to attack from chemicals or abrasive action caused by metal-wheeled trucks as well as excellent bonding properties.
Fields of application
1- Industrial floor toppings.
2- Chemically resistant floors & wall rendering.
3- Repairs of spilled concrete floors, roads, and ramps.
Dosage
5 kg/ m² thickness 3 mm. |
|
Cemtex Epoxy Mortar
Description
Two-components epoxy resin which is formulated to provide a material for repairing concrete and similar material, subjected to attack from chemicals or abrasive action caused by metal-wheeled trucks as well as excellent bonding properties.
Fields of application
1- Industrial floor toppings.
2- Chemically resistant floors & wall rendering.
3- Repairs of spilled concrete floors, roads, and ramps.
Dosage
5 kg/ m² thickness 3 mm. |
|
Cemtex Epoxy Primer
Description
Two-components epoxy resin which is formulated to provide a material for repairing concrete and similar material, subjected to attack from chemicals or abrasive action caused by metal-wheeled trucks as well as excellent bonding properties.
Fields of application
1- Industrial floor toppings.
2- Chemically resistant floors & wall rendering.
3- Repairs of spilled concrete floors, roads, and ramps.
Dosage
5 kg/ m² thickness 3 mm. |
|
Cemtex Epoxy Sealer
| Description
Low viscosity two-component Epoxy resin solvent and filler free. Especially formulated to provide a material possessing outstanding adhesive qualities and penetrative power suitable for both interior and exterior applications.
Fields of application
1- Insulation for concrete & steel protection from corrosion.
2- Sealing and filling hair cracks in concrete floors and structures.
3- Surface treatment and protection against corrosion due to chemicals.
Dosage
One Litre per 4-8 m² depending upon porosity and surface conditions.
|
Cemtex Epoxy Self Leveling mortar
| Description
Two pack materials based on epoxy resin with a very low viscosity.
Fields of application
1- Repairs of cracks in concrete.
2- Bonds of broken concrete sections.
3- Repairs of floor toppings.
4- Repairs of joint edges, pipes,.... etc.
Consumption:
6 kg/m² thickness 3 mm. |
|
Cemtex Injector - Rigid form
Description
A Liquid material for cracks' injection. It stops leakage immediately and is characterized by its high expansion rate which could reach 35 times.
Fields of application
Leakage stop for water tanks, basements, sewage plants & pipes - Simply any leaking concrete structure.
Dosage
Depends on the case
|
 |
|
|
Cemtex Injecto System
Description
The guaranteed modern Water Stop system - Safe and easy to install. Waterproofing of cold and construction joints by installation of Injecto tubes; it is a new technique substituting the water stop system. Injection of resins is also possible when water leakage occurs or after total curing of the concrete. The Injecto tube consists of woven synthetic membrane reinforced with steel wire that prevents collapse of the tube when the concrete is poured.
Fields of application
1- Joints' leakage prevention.
2- Total insulation of the joints.
Dosage
Per meter length of joint
|
 |
|
|
Cemtex Tar Epoxy high concentrate
Description
(contain minimum 50% epoxy) Two-component product; upon mixing together, it produces a high quality epoxy cool tar. It is tough, firmly adherent and has an outstanding water, chemical, mineral oil, sea water, sewage water and aggressive soil .etc. resistant.
Fields of application
1- Sewage pipes outside surfaces.
2- Pipes lining for resistance to chemicals.
Dosage
Litre/4-6 m² |
|
Isoplast Insulating Coating
Description
2 component acrylic base which is ready to be used with highly elastic materials for waterproofing concrete water structures and steel protection. It supports high water pressures up to 7 bars positive pressure and 2 bars negative.
Fields of application
1- Insulation of all surfaces: concrete, bricks and metal
2- Insulation and protection from heavy rains for roof-terraces, swimming pools, basements and laundries.
Dosage
3 kg/m² depending on ground surface. |
|
Murefix Grout "28"
Description
Anti-contraction powder ready to be mixed with water. It is rich with some expandable materials to overcome any contraction. Very efficient in fillings with high strength.
Fields of application
1- Joints filling.
2- Surface treatment and curing before adding epoxy protection surface.
3- Concrete cracks filling.
4- Machines bases.
5- Anchoring. ·
Dosage
2.3kg/ Litre |
|
Murefix Quick Setting Cement
Description
Fast setting cement (Free of chloride and corrosion material). It is a special material for quick fixing, water cut off and sealing.
Fields of application
1- Quick fixing of wall hooks, radiators and banisters
2- Sealing and preventing water leakage.
3- Fixing and insulation at the same time.
4- Set under pressure gush leaking water.
5- Treat and repair under water, sea water and sewage leaking.
6- Corrosion free, safe to work with steel reinforced concrete.
Dosage
Depending on the application |
|
Murefix self leveling Mortar
Description
Very abundant cementitious powder, quality is improved by polymer binding.
Fields of application
1- Leveling of depressions and unevenness of ground floor before covering with tiles, carpets or floor cover sheets.
2- Leveling and covering of rough and damaged floors in terraces, cellars and garages.
Dosage
1.5 to 2 kg/ m² each 1 mm material thickness. |
|
|
|
|
|
|
|
|
|
|
Murefix 'SM'
Description
Ready for use, chloride-free repair mortar in powder form for damaged or faulty concrete surfaces.
Fields of application
1- Protection of concrete surfaces against environmental effects.
2- Bonds in layers from 1 to 3 cm thickness.
3- Reinforcing the concrete cover for steel protection.
Dosage
Depending on the surface. |
|
Murex Forte
Description
Ready to be used with sealing slurry for waterproofing constructional units of any kind. It can crystallize in the very small porous in the concrete / mortar and seal it.
Fields of application
1- Sealing of foundation walls and cellars, masonry and flat roofs of old and new constructions.
2- Sealing of swimming pools, reservoirs,... etc.
3- Sealing and protection of buildings exposed to underground water pressure or other kinds of moisture.
Dosage
1-2 kg/layer, 2-3 layers are required |
|
Murexin 'M'
| Description
Waterproofing, chloride-free additive for mortar, plasterwork and concrete.
Fields of application
1- Wherever water tightness is required; as in cellars, clarifying plants and foundations placed in ground water.
2- Floor toppings & terrace sealing.
3- Making interior and exterior plasterwork absolutely proof against water pressure for facades, swimming pools,concrete tanks
and silos... etc.
Dosage
1 Litre for 8-10 water Litre |
|
|
Murexin Quick Hardener
Description
Plasticizing additive with high early strength which is suitable to be used with all types of Portland cement.
Fields of application
1- Short time form removal together with high early concrete strength.
2- Early utilization of concrete floors and surfaces.
3- Reducing the water/cement ratio.
Dosage
1% of cement weight (test is required to determine the best dose with the requirements) |
|
Murexin Retarder "Control retarder"
Description
Retardation of the concrete initial set time up to 24 hours and even more, allowing easy operation & compaction, also in hot weather.
Fields of application
1- Joint-free concreting without the formation of cracks due to shrinkage; that's why it is used in dams, bridges & swimming pools.
2- Admixture for concrete pumping & ready mixed concrete and mix in site, concrete transporting for longer distance, especially in warm weather.
3- Fulfilling the Slip Form by CONTROLING the setting between morning and night shifts, winter and summer.
Dosage
0.5- 1.5 % (Up to more than 3% in the special cases) of the cement weight depending on the desired retardation & conditions. (Contact our technical office for the special cases.) |
|
Rostil - P
Description
Rust removal and antioxidant.
Fields of application
1- Full treatment and protection against rust.
2- Treat rusted steel rebar and protect it against future rusting in one step.
3- Economic material instead of traditional mechanical ways. ·
Dosage
Depending on the case and nature of the surface.
|
|  |
|
Unicrete
Description
Plasticizer reducing the porous in concrete for water proofing concrete and mortar - liquid and powder form.
Fields of application
Construction & sealing of tunnels, sewage plants, containers for drinking water, swimming pools and concrete tanks.
Dosage
1% of cement weight |
|
Weldcrete perfect
| Description
Solvent-free two-component adhesive epoxy resin based which hardens uniformly bonding all building materials together and each to other as well. Layers can be thick enough without shrinkage or cracking, and can attain an exceptionally high degree of strength, elasticity and adhesion.
Fields of application
1- Bonding between fresh and old concrete.
2- Joining materials of most varied character such as ceramic tiles, metal, wood, stone and leather.
Dosage
Depending on the usage and the nature of the surface. |
 |
|
|
